What it does
Enter an address with a CIDR prefix, such as 192.168.1.10/24 or 2001:db8::/32, and the tool works out the network address, broadcast (IPv4), usable host range and how many addresses the block contains.
IPv4 details
For a /31 there is no broadcast (point-to-point, RFC 3021: both addresses are usable); a /32 is a single host. The netmask, wildcard mask (used in Cisco ACLs) and whether the address is private (RFC 1918) or loopback are also shown.
Splitting a network
Choose a longer prefix and select "List subnets" to see every smaller subnet the current network splits into, each with its own first and last address. The list is capped at 1024 rows.
IPv6
IPv6 addresses are shown in both compressed and fully expanded form, along with the first and last address of the block and a rough guess at its scope (link-local, unique local or global).
Example
172.16.5.4/12 is not a /12 network address: the tool masks the host bits and reports the network 172.16.0.0/12, broadcast 172.31.255.255 and 1,048,574 usable hosts. Splitting 192.168.0.0/24 into /26 lists four subnets of 62 usable hosts each.
Summarize and compare
The Summarize CIDRs box takes one address or block per line, IPv4 and IPv6 mixed, and returns the smallest list of blocks that covers exactly those addresses: 10.0.0.0/24, 10.0.1.0/24 and 10.0.2.0/24 become 10.0.0.0/23 plus 10.0.2.0/24, because three /24s cannot form one block. Lines that cannot be parsed are listed separately. Compare two ranges reports whether two blocks are equal, nested, partly overlapping or disjoint, which is useful before adding a firewall rule or a route.
Limits
- Input must be an address with an optional prefix length such as
/24. A dotted netmask like10.0.0.1/255.255.255.0is not accepted; convert it to a prefix first (255.255.255.0 is /24). - Splitting is IPv4 only, needs a longer prefix than the current one, and stops at 1024 subnets.
- The address class and the IPv6 scope are only hints. Use the prefix, not the class, to reason about a network.
To read the binary behind a mask or an octet, use the Number Base Converter. When a block ends up inside a URL, the URL Parser separates the host from the port and path.
Examples
192.168.1.10/24gives the network192.168.1.0/24, netmask255.255.255.0, wildcard mask0.0.0.255, broadcast192.168.1.255, 256 addresses in total, the usable host range192.168.1.1 - 192.168.1.254(254 hosts), the historic class C and “Private (RFC 1918): Yes”.10.0.0.0/31has 2 addresses and both are usable. A /31 is the point-to-point case of RFC 3021, so there is no separate network and broadcast address.2001:db8::/32is IPv6. The tool shows the expanded form2001:0db8:0000:…, the first and the last address and the size as2^96addresses, which is too large to list exactly.
Splitting, summarizing and comparing
- Split:
192.168.1.0/24split into /26 blocks gives four subnets with 62 usable hosts each:192.168.1.0/26,192.168.1.64/26,192.168.1.128/26and192.168.1.192/26. For example, the third one has the hosts192.168.1.129 - 192.168.1.190. - Summarize: the three lines
10.0.0.0/24,10.0.1.0/24and10.0.2.0/23become one exact block,10.0.0.0/22. The result covers exactly the addresses you listed and nothing more, so it is safe for a firewall rule. - Compare:
10.0.0.0/16and10.0.5.0/24give “A contains B: every address in B is inside A.” The tool also reports equal, partially overlapping and disjoint ranges.
Frequently asked questions
How do I work out the number of usable hosts?
A prefix of /n leaves 32 minus n host bits. The block has 2 to the power of that many addresses, and for blocks up to /30 two of them are reserved for the network and the broadcast address. A /24 therefore has 254 usable hosts and a /26 has 62.
What is a wildcard mask?
The inverse of the netmask. It is written in access lists on some network devices, where 0 means “this bit must match” and 1 means “any value”.
Which IPv4 ranges are private?
The RFC 1918 blocks 10.0.0.0/8, 172.16.0.0/12 and 192.168.0.0/16. The tool tells you when an address is inside one of them, or is a loopback address.
Is the address I enter sent anywhere?
No. All calculations run in your browser.
Privacy
This tool runs entirely in your browser. What you enter is processed on your device and is not sent to a server.