QR Code Error Correction, Size and Capacity Explained
Short answer: a QR code scans reliably when it has enough error correction, enough empty border (the quiet zone) and enough physical size. Pick the level in the QR Code Generator: L recovers about 7% damage, M 15%, Q 25% and H 30%. Higher levels survive scuffs, but hold less data.
Error correction levels
| Level | Damage it can recover |
|---|---|
| L | about 7% |
| M | about 15% |
| Q | about 25% |
| H | about 30% |
Use a higher level for codes that will be printed on rough surfaces, outdoors, or with a logo over the middle. Use a lower level when you need to fit more data.
Capacity
The generator supports versions 1 to 40 and three data modes: numeric, alphanumeric and byte. At the largest version (40), the capacity is:
| Level | Numeric | Alphanumeric | Byte |
|---|---|---|---|
| L | 7,089 | 4,296 | 2,953 |
| M | 5,596 | 3,391 | 2,331 |
| Q | 3,993 | 2,420 | 1,663 |
| H | 3,057 | 1,852 | 1,273 |
A short URL needs a far smaller, simpler code than a long text. Shorter content means bigger modules at the same print size, which scans more easily.
What you can encode
The generator has formats for a URL, plain text, an email (mailto:), a phone number (tel:) and a Wi-Fi login (WIFI:), which is a good place to use a strong random password.
Size and the quiet zone
- Keep the quiet zone, a blank border of 4 modules, on every side. Cropping it is a common reason for failed scans.
- As a rule of thumb, the printed size is about a tenth of the scanning distance.
- On screen, aim for at least 4 pixels per module.
Common mistakes
Low contrast between the dark modules and the background (see the WCAG contrast ratio guide), a cropped border, a code that is too small for the distance, and too much data. Always test the final code with a real phone before printing a thousand copies.
Static codes
These codes are static: the data is written into the pattern itself. They cannot be edited later or tracked, and they never expire. If the destination may change, point the code at a URL you control.
How to set QR code error correction in the QR Code Generator
- Open the QR Code Generator.
- Choose the format and enter your data.
- Pick an error correction level.
- Check the preview, then test it with your phone.
- Download it and print at a size that suits the scanning distance.
Limits to know
- Static codes only, with no tracking.
- Capacity falls as the correction level rises.
- Everything runs in your browser.
Frequently asked questions
Which error correction level should I use? M is a common balance. Use Q or H for rough or decorated codes.
What is the quiet zone? The empty border around the code, 4 modules wide.
How big should a printed QR code be? About a tenth of the distance it will be scanned from.
Can I make a Wi-Fi QR code? Yes, with the Wi-Fi format.
Can I change a QR code after printing? No. Static codes hold the data itself.
Related tools and guides
- URL Encoder & Decoder and the URL encoding guide
- Strong random password guide
- Contrast checker guide for readable colours